|
AP Dome Drive Kit for Bane Bots Motor
The AP Dome Drive kit for the BaneBots
MP-36064-540 gear motor is designed to provide a means for rotating
the dome on an Astromech robot. The AP Dome Drive comes
standard with a modular drive wheel. If you prefer we can provide an
Aluminum Gear to interface with the A&A gear system. It includes
the new mounting bracket with increased surface area (a plus for
wooden frames), and a new pivot bearing system.
Each kit consists of a custom machined motor
holder, bracket, and all necesssary hardware to mount your
drive. You must supply the BaneBots motor, Rockler bearing
and the RC speed controller to drive the motor. The kit
includes the modular Dome Drive Wheel Assembly with a Servo City ¼”
hub adapter and four 5-40 socket head mounting screws. Please email if you want to
substitute an aluminum gear instead of the drive wheel for A&A
Gear Drive.
The motor holder is suspended from the the
bracket on a precision hardened steel insert and shoulder screw to
assure correct alignment. A tension spring is used to insure
adequate contact pressure.
This kit is designed for the BaneBots
MP-36064-540 gear motor. This motor provides long use with
little maintenance. It uses a 0.375" diameter steel
drive shaft, metal gears, and very high torque design for smooth
operation on heavy domes. It provides much higher torque than
the Pittman motor but has a higher current draw. Be sure to
review the specs on this motor when choosing an ESC. Recommended electronic speed controller
is the Vantec RET411.
Motor
Specs at www.banebots.com
|
